9012: Xtreme LED Pro

Xtreme LED Pro: XenonDepot’s 9012 Xtreme LED Professional series of drop-in headlight bulbs are just better right from the start. They incorporate today’s most advanced components and features for unparalleled compatibility and performance. Hold one in your hand and you’ll immediately discern their uncommonly high quality fit, finish, and feel: they’re made of premium materials, formed and assembled with precise craftsmanship.

Optimal Heat Dissipation: The next thing you’ll notice is their all-new patented aluminum alloy leaf passive heat sink. Its compact and readily configurable design allows an easy fit in most any headlamp housing, and with its much larger contiguous thermal path, it does a better job shedding heat off the LEDs than past-type flexible mesh heat sinks. With no flex-mesh junctions to break and no motorized fans to make noise and electrical interference, clog, or fail, the superior heat rejection performance of the alloy leaf passive heat sink is retained over the long haul, for the full rated life of the emitters. That translates directly to excellent performance; the cooler LEDs can be kept, the higher their output.

Beam Pattern: The emitters themselves are genuine Lumileds ZES, three on each side of the light head, and this together with their undomed configuration means they closely replicate the size of the 9012 halogen filament. That means a better optical match than longer 4-emitter arrays or domed COB emitters, both of which violate the light source box your headlamp’s optics were designed around, and because the high output comes from three chips rather than four, luminance is higher for better beam punch and spread.

Lumens And Output: Speaking of output: anyone can throw around inflated lumen numbers and most vendors do. Some of those numbers have no basis in reality, they’re just fibs. Some of them are somewhat accurate, but only immediately after the bulb is lit up in a cold chamber, without accounting for the significant droop that happens when improperly chosen emitters are inadequately cooled – don’t drink the kool-aid! Our new 9006 Xtreme Pro bulbs are rated honestly: 1750 lumens stable, measured after the bulbs have been operating continuously for an hour in 60C / 140F heat. That’s a rating that means (and gives you) exactly what it says. And with the 5500K color temperature of our emitters, we’re giving you true white light, not artificially jacking up the lumen rating with a bunch of useless deep-blue light that can only attract unwanted police attention, not help you see.

They’re Just Better: There’s more clean-sheet engineering where you can’t see it: we’ve used copper circuit boards for optimal thermal conductivity, and our compact base means the rigid tail of the light head is only 25mm much smaller than other LED bulbs on the market. You’ll note the light head is remarkably compact, without bulky over-length that prevents many other LED bulbs from fitting all the way into many headlamps. And the light head is clockable, too, so you can fine-tune the output for the best optical match with any lamp you might install them in. Truly, this is the top-performing LED bulb with OE-level quality and “fit it and forget it” durability and dependability.

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won’t regret it!

What’s Included

LED Bulbs: 2x 9012 Xtreme LED Pro
LED Drivers: 2x
Wiring: 9012 Plug n Play
Warranty: 3 Years

Compatibility

Low Beams: 9012 Only
High Beams: 9012 Only
Fog Lights: 9012 Only
Daytime Running Lights: 4V-9V non-pulsed
Pulsed DRL: Add Optional PWM Harness

TECH SPECS

LED Emitters: 6x Philips Lumileds Z ES per bulb
Kelvin: 5500K or Yellow
Intensity: 1750lm (raw; per bulb)
Input Range: 12-24V DC